FROM OUR ONLINE STORE
Save yourself some time and order right now.
Why drive to a store when you can conveniently order Shield n Peel right here.
Watch our 'How to do it' video on You Tube
This instructional video will explain how to apply and remove Shield n Peel
"Shield n Peel saves valuable time and money replacing glass and delivers a pro-active solution to the glazing industry. I would recommend the use of Shield n Peel products for glass protection every time."
Wideline Windows & Doors
"It's easy to apply by our personnel on site as and when required, thus reducing the need to engage separate sub contractors. Once the project is complete it's just a matter of peeling it off, saving on cleaning time."
HOW TO APPLY
• Remove all dirt, grime and other contaminants (if any) and ensure
surface is dry.
• Stir Shield n Peel in a circular lifting motion. Best results are achieved by
using the aid of an electric drill and paint stirring attachment.
PREPARATION - TAPING
Taping frames or borders is not always necessary, but it can help with the removal of Shield n Peel. It also provides a margin of error incase the outside area is porous.
TAPE FRAMES OR EDGES
TAPE FRAMES OR EDGES
APPLICATION - CHOOSE METHOD
OPTION 1: Use a 130mm roller with a 20mm polyester nap or similar.
OPTION 2: A Spray Paint Gun.
OPTION 1: ROLLER
OPTION 2: SPRAY GUN
APPLICATION - COATING
Allow a border of 5-10mm around the surface to be coated. If coating is
required of rubber seals and non-porous frames, be sure to apply
liberally, 2 coats for ease of removal.
Once product has dried and protection is no longer required.
APPLICATION - SECOND COAT
'If' two coats are required, wait until first coat is touch dry before applying the second coat. Again, remember to apply the second coat liberally around frames. For Rollers, smash the rollers into the edges to help build the coat around the edges. For Spray Paint Guns, continually spray to soak the edges to ensure a good thickness for removal.
A minimum coating thickness of 150 microns WET is required, achieving a coverage of approximately 4sq. metres per litre. For best results, a WET film thickness of 250 microns is recommended achieving a coverage area of approximately 4sq metres per litre.
NOTE: Areas are a guide only as actual coverage achieved is determined by the substrate surface to be coated as well as the application (roller/spray) techniques used.
When spraying, a good indication that you've applied an appropriate amount of Shield n Peel is that the coat will reflect light and mirror objects. A good indication you have applied more than enough, the coat will begin to wrinkle and sag.
• Ensure adequate ventilation when applying product.
• For best application, apply at temperatures between 14°C and 25°C.
• Avoid applying product if temperature is below 10°C or above 35°C.
HOW TO REMOVE
Approximately 30 minutes (touch dry).
NOTE: Drying time is a guide only. Longer drying times may be required under cooler or humid conditions.
Start from a corner and carefully peel back the coating. If applied correctly, you should have enough tensile strength in the coating to remove it in one sheet.
HARD TO REMOVE?
If your coat was not applied thick enough, or spread out too thinly, or left on much longer than the thickness of the coat allowed. You will find the coat will bake on. Scaling and feathered edges are a sign your initial coat was applied to thin for the time period needed for the job of protecting your windows.
Shield n Peel Peelstrip when applied will help remove baked on surfaces. You can find Peelstrip on our products page.
Another method which can be combined with Peelstrip is using a high pressure water hose or power sprayer to remove the baked on coating.
• Avoid removing the peelable coating in temperatures below 10°C as the
film may be brittle and diffcult to remove.
• Coating is best removed at temperatures between 14°C and 35°C.
ALSO REMOVES RENDER
REMOVE AS ONE SHEET
DRY ROLLER VERSION
REMOVE FROM CORNER
USE HIGH POWERED HOSE
DRY SPRAY GUN VERSION
REMOVE AS ONE SHEET
BAKED ON SCALING
WHAT IS SHIELD N PEEL FOR WINDOWS?
Shield n Peel for Windows is a peelable coating that is applied and dries as a protective film offering quality temporary surface protection to most non-porous surfaces.
WHY USE SHIELD N PEEL FOR WINDOWS?
Shield n Peel for Windows is a great alternative to masking windows, window frames, bench-tops and other non-porous surfaces, offering protection against paint, cement and render spatter as well as damage caused during the building, renovating and cleaning process.
HOW LONG WILL THE PROTECTION LAST?
Based on the minimum recommended WET film thickness application of 150 microns on glass. Shield n Peel can last up to 6 months, depending on climate conditions. Additional coasts may be applied where longer protection is required.
WHAT CAN SHIELD N PEEL FOR WINDOWS PROTECT?
Non-porous surfaces such as windows, anodized and powder-coated aluminium window frames & rubber seals. For a full list please visit our products page here.
WHAT SHOULD I AVOID USING SHIELD N PEEL FOR WINDOWS ON?
Fiberglass, acrylic, perspex, brick, concrete, timber, 'soft' Low-e glass or any other porous surfaces.
CAN SHIELD N PEEL FOR WINDOWS BE USED ON LOW-E GLASS?
Most 'hard' Low-e (Low Emissivity) glass surfaces can be coated with Shield n Peel.
SHOULD I TEST PATCH SHIELD N PEEL FOR WINDOWS?
Yes. It is recommended that you first apply a test patch to ensure compatibility before proceeding with the entire job.
ALL YOUR SHIELD N PEEL RESOURCES
The Shield n Peel support homepage is your starting point for help with our Surface Protection products, featuring step by step instructions, FAQ and Videos. Get started by using the links below.
Phone: 1300 852 646
Fax: 02 4353 9466
PHONE: +61 2 4353 9660
FAX: +61 2 4353 9466
UNIT 12, 10 PIONEER AVE
TUGGERAH BUSINESS PARK
TUGGERAH NSW 2259
Tags - surface protection covering tile protection coating prevent repairs construction application window protection temporary work site insurance costly replacement videos floor protection paint shield concrete protection aluminium frames 4wd - four wheel drive protective film benchtops bath & spa easy to remove DIY glaziers window manufacturing bath protection peelstrip
© 2015 Guru Corporation Pty Ltd
Site Designed by Guru Corporation